Laptop Connectivity Problems

A problem that I encounter almost daily on my 2013 MacBook Pro is a connectivity issue. Whether I'm connected wirelessly or wired via an Ethernet cable from a repeater, I lose the connection and am repeatedly prompted for the password to the WiFi network if I'm connected wirelessly. After a short while the problem goes away and all is well. The problem is annoying but doesn't seriously trouble me.

Nonetheless, I'd like to get to the bottom of it and there are plenty of requests on Internet forums from Linux Mint users for solutions to exactly this problem. The fact that it doesn't make any difference whether I'm connected via WiFi or cable rules out the WiFi hardware driver as the problem. Neither does it matter whether I'm connected to the WiFi repeater or the WiFi router.

The Internet router that I'm using is an ancient one and only operates on the 2.4 Ghz frequency with no support for 5 Ghz or any other frequencies! I don't use Bluetooth on this laptop so I've just now turned it off and I'll see if that makes any difference. It shouldn't but who knows. It's worth a try. Overall, I should be happy that things are working as well as they are given the antiquity of the technology that I'm using.

The operating system that I'm using is Linux Mint 20.3 Cinnamon with the Cinnamon version being 5.2.7. This means that the system is up-to-date. My WiFi adapter is shown in Figure 1.

Figure 1

I'd like to say that things worked flawlessly when I had Mac OS X installed on this laptop but that wasn't the case. Right from the beginning I had IP conflict alerts whenever connected to a repeater. I first encountered the issue when I stayed at a hotel in Singapore that was clearly using a repeater. In my own bedroom, where the WiFi signal was weak, I encountered the same problem when I installed a repeater. I solved the problem by connecting an Ethernet cable from the repeater to my laptop.

Installation of Linux Mint 20.3

You can't say that there's no technological excitement in my life. I finally had to abandon the use of Ubuntu on my 2013 MacBook Pro. The keyboard, trackpad and mouse freezes were becoming too frequent and numerous reboots were required to activate these devices. Finally no amount of rebooting could activate them and so I turned to Linux Mint.

The installation went smoothly enough but the boot up process was, and continues to be, interrupted by a series of error messages. That is a minor irritation but far worse was to come. I discovered that the OS didn't recognise the WiFi adapter in the laptop. So, for the moment, no WiFi but thankfully I have an Ethernet connection. I had an old TP-LINK WiFi dongle that must be at least a decade old and I tried that out but no luck. Perhaps a can buy a more up-to-date dongle that works. This is a matter for deeper investigation but for the moment, as long as the keyboard, mouse and trackpad don't freeze up on me, I'll be happy.

 

 

My initial attempt to install the Chrome browser failed but then I was reminded that flatpak is built into Linux Mint and, by using that, the installation of the Chrome browser and also Calibre was straight forward. So far, after a couple of days of using Linux Mint, I've had no problems and I hope things stay that way.

I've put out a request for help on the Linux Mint Forums and hopefully help will be forthcoming. So far 20 views but no comments. However, it's been up less than an hour. 

I'll add an addendum if help arrives.

ADDENDUM

... and help did arrive! A user called sleeper12 offered two suggestions. The first was:

inxi -Fxxxrz && rfkill list && iwconfig && mokutil --sb-state 

This had no effect but the second suggestion did the trick:

sudo modprobe -r wl && sudo modprobe wl && sudo systemctl restart network-manager.service 

This is great news and my laptop is now fully functional, apart from the webcam that I assume is still not working. I should ask for help with that on the forums as well.

WiFi Problems with MacBook Pro

My somewhat dated MacBook Pro is still serving me faithfully but I've had problems with getting it to connect with WiFi repeaters. 

I have a TP-LINK TL-WA855RE N300 Wi-Fi Wall Plug Range Extender/Repeater/Access Point and was having no end of trouble getting my MacBook Pro to maintain a WiFi connection to it. It would connect but soon an IP conflict message would appear and the connection would be broken. Having become so reliant on WiFi, I'd forgotten that this repeater has an Ethernet port. 

When I remembered, I then used a wired connection. My MacBook was assigned an IP address and that was the end of my problems. I need the repeater in my study, which is a little out of range of the TP-Link router, and so the lack of mobility is not a problem. I can simply turn the WiFi back on when I'm elsewhere in the house. 

The problem only occurred with the MacBook. My Samsung smartphone experienced no such problems. So the WiFi connectivity problem was never resolved but an alternative connectivity solution came to the rescue. Whether this same problem occurs with the latest MacBooks I don't know. 

Of course I don't have a dedicated Ethernet port on my MacBook Pro and so I needed to use a dongle, which fortunately I already had in my possession. With that and an Ethernet cable, I've had no further problems. It's just a reminder that, even in the world of technology, everything old can be new again. Once upon a time, there was no WiFi and Internet connectivity, when there was an Internet to connect to, was achieved via cables. Now, in my study, I'm living in the past.